Vertical Inverter motor - Page 2
Vertical 3 Phase ac induction motors, Horizontal Inverter duty, Vertical Inverter Duty motor, DC Brake motor Oil Pressure Motor, CNC machine, AC mini Induction DC gear motor
When Should I Change the Oil in My Reducer?
15:53 15/10/2020
Regular oil changes aren’t just for your gearbox. Almost every gear reducer uses oil to keep operations smooth and efficient. This oil serves a few specific purposes, namely minimizing friction and wear, dissipating heat, and lubricating component bearings, and seals. Gear reduction wouldn’t last without it.
Gearbox Noise & Vibration: Shaft Mount Reducer Solutions
16:47 14/10/2020
Are you noticing gearbox noise and vibration in your reduction drive? This is a sign of an issue that should be fixed sooner rather than later. Break down in your helical shaft mount speed reducer can cause a shutdown of your entire machine. Any delay in production is costly and unpleasant. Definitely something worth avoiding.
Gearbox Service Factor: What Is It & Why Is It Important?
14:55 13/10/2020
What is a service factor exactly? It’s the ratio of horsepower your gear reducer can mechanically handle compared to the horsepower required for your application.
Single Phase Induction Motor and Its Working
14:24 12/10/2020
As the power requirements of single load systems are usually small, all our homes, offices are supplied with a single–phase A.C. supply only. To get proper working conditions using this single-phase supply, compatible motors have to be used. Besides being compatible, the motors have to be economical, reliable and easy to repair.
Single-Phase Motor - Types, Uses, Advantages and Disadvantages
09:14 10/10/2020
Depending on the type of machine and application you require, some motors will work better than others. If you are running smaller equipment that requires less horsepower, a single-phase motor will work best for your needs.
Difference Between Single Phase & Three Phase Induction Motor
14:10 09/10/2020
The Induction motor is a type of AC motor that works on the principle of electromagnetic induction between the stator and rotor. The stator is the stationary part of the motor and the rotor is the rotary part.
Single phase Induction Motors
13:48 08/10/2020
A three-phase motor may be run from a single-phase power source. However, it will not self-start. It may be hand started in either direction, coming up to speed in a few seconds. It will only develop 2/3 of the 3-φ power rating because one winding is not used.
Helical bevel gear reducer
15:56 07/10/2020
Our RV series is a bevel gear reducer with a high-strength cast iron case. This series of reducer is designed and manufactured on the basis of modular combination system. There are many motor combinations, installation forms and structural schemes.
What is inrush current in an AC motor and why does it matter?
16:14 06/10/2020
When an electrical device, such as an AC induction motor, is switched on, it experiences a very high, momentary surge of current, referred to as inrush current.
How do shear pin torque limiters work and when are they used?
09:10 05/10/2020
Shear pin torque limiters are a simple, cost-effective design for protecting equipment from torque overloads. In their most basic form, they incorporate a pin (or, for very high torque ratings, multiple pins) inserted between two rotating elements, such as discs or flanges.
What is direct torque control (DTC) for AC induction motors?
14:05 03/10/2020
Variable frequency drives control AC induction motors through one of several control schemes. Scalar control (also referred to as V/Hz or V/f control) varies both the voltage and frequency of power supplied to the motor to maintain a fixed ratio between the two.
What function do thermistors and KTY sensors serve in motors and gearmotors?
13:00 02/10/2020
One of the most important operating parameters of motor and gearmotor operation is the temperature of the motor windings. Motor heating is caused by mechanical, electrical, and copper losses, as well as heat transferred to the motor from external sources, including the ambient temperature and surrounding equipment.
What is the Machinery Directive and how does it relate to motion system safety?
10:54 01/10/2020
Machines and equipment placed on the EU market must be CE-marked, indicating conformity with the essential safety and health requirements of the Machinery Directive.
Geared Motor Types and Their Importance
14:08 30/09/2020
A geared motor is a component whose mechanism adjusts the speed of the motor, leading them to operate at a certain speed. geared motor have the ability to deliver high torque at low speeds, as the gearhead functions as a torque multiplier and can allow small motors to generate higher speeds.
What is the structure of a gear motor?
09:51 30/09/2020
The main transmission structure of the geared motor is a drive motor and a gearbox.
Difference between drum motors and gear motors for food conveying
15:42 29/09/2020
Traditional conveyor setups in food-processing and packaging industries use external gear motors as the belt-drive mechanism. But drum motors are increasingly common as an alternative conveyor drive. Here we review the strengths and weaknesses and potential improvements for both drive options.
How to choose service factor of a gear unit
11:14 29/09/2020
The effect of the driven machine on the gear unit is taken into account with sufficient accuracy using the service factor fB. The service factor is determined according to the daily operating time and the starting frequency.
The Difference Between Gearbox Service Factor and Gearbox Service Class
16:28 28/09/2020
Before you choose a Dolin gearbox for your application, be sure to know the difference between gearbox service factors and gearbox service class. Determining the appropriate service factor is the first step in selecting the right gearbox for your job.
What is Gearbox Service Factor? Why is it Important?
16:23 26/09/2020
What is a service factor exactly? It’s the ratio of horsepower your gear reducer can mechanically handle compared to the horsepower required for your application.
Gearbox service factor and service class explained
14:15 26/09/2020
Sizing a gearbox (or gearmotor) for an industrial application typically begins with determining the appropriate service factor. In simple terms, the service factor is the ratio of the gearbox rated horsepower (or torque) to the application’s required horsepower (or torque).
- Worm gears: What are they and where are they used? (16:44 25/09/2020)
- Worm Gear Applications and Usages (11:41 25/09/2020)
- Industrial Applications Where Worm Gears are Beneficial (15:38 24/09/2020)
- The Common Industrial Applications of Worm Gear Motors (08:39 24/09/2020)
- What Is a Gearmotor? (16:10 23/09/2020)
- 10 Advantages of Geared Motors (11:00 23/09/2020)
- A Guide To Purchasing Gearboxes And Geared Motors (08:22 23/09/2020)
- Standard Warranty Information (14:21 21/09/2020)
- 4 Helpful Noise Reduction Strategies For Industrial Gearboxes (11:47 21/09/2020)
- Looking to buy a geared motor for your industrial needs? (14:42 19/09/2020)
Join