Vertical Inverter motor - Page 9
Vertical 3 Phase ac induction motors, Horizontal Inverter duty, Vertical Inverter Duty motor, DC Brake motor Oil Pressure Motor, CNC machine, AC mini Induction DC gear motor
Why use a gearbox with a stepper motor?
10:19 14/07/2019
Stepper motors are known for their accurate positioning capabilities and high torque delivery at low speeds, but they require careful sizing to ensure the motor matches the load and application parameters, to minimize the possibility of lost steps or motor stalling.
5 tips prior to designing the gear motors
22:15 22/06/2019
We could say gear motors are considered to be a fundamental part in industry. Their applications are endless, and they have always been the central part of the most precise motions and displacements in machines.
What are DC Motors Usually Gear Motors
22:22 21/06/2019
Many battery-operated devices rely on DC motors for power. Because of their high shaft speeds—typically 1500-6000 RPM under load—DC motors are commonly paired with a gearbox.
What is a DC Motor?
20:52 03/06/2019
A Direct Current (DC) motor is a rotating electrical device that converts direct current, of electrical energy, into mechanical energy. An Inductor (coil) inside the DC motor produces a magnetic field that creates rotary motion as DC voltage is applied to its terminal.
What are Brushless DC Motors
18:19 31/05/2019
A motor converts supplied electrical energy into mechanical energy. Various types of motors are in common use.
How do gearmotors impact reflected mass inertia from the load?
09:55 06/05/2019
In any drive system (that is, a motor driving a load), there is going to be inertia. Specifically, the motor will have inertia as will the load.
Benefits to Using Dolin gear motors
10:34 01/05/2019
Using gear motors have many benefits in various industrial settings. About one-third of motor-driven motion systems use gearing, benefitting size-constrained applications and those running at 1,000 rpm or less.
Coupling Types for Different Applications
20:06 01/04/2019
After spending money on a powerful new pump and the motor to run it,the next big decision is how to connect the two in a way that maximizes their efficiencies and protects them from normal wear and tear.
How to select the best type of gear reducer
11:40 31/01/2019
Gear reducers are an essential part of mechanical power transmission systems, being used for speed and torque conversion. Selecting the right one for an application is a fairly straightforward process.
Understanding IP Ratings
21:50 30/01/2019
The protection of enclosures against ingress of dirt or against the ingress of water is defined in IEC529 (BSEN60529:1991). Conversely, an enclosure which protects equipment against ingress of particles will also protect a person from potential hazards within that enclosure, and this degree of protection is also defined as a standard.
Energy Regulations & Standards
22:33 08/12/2018
The standards for energy efficiency differ greatly around the world not only in the implementation but also in the introduction.
IEC Standards for electric motors
22:17 07/12/2018
In 1999, the European Commission established different efficiency classes for electric motors to reduce energy consumption and to create awareness among various industries to the importance of a more sustainable environment.
5 Strategies to Build a Global Brand
08:14 04/12/2018
Building a global brand requires more than just launching a web site that's accessible from almost anywhere in the world.
INSTRUCTIONS FOR GEAR REDUCER MOTOR
20:46 01/12/2018
Welcome to choose DOLIN series gear reducer motors (reducers). Please refer to these instructions before installation and using.
The Common Industrial Applications of Worm Gear Motors
18:55 30/11/2018
Worm gear motors are mechanisms built with a ‘worm’, which looks like a screw, engaging a wheel.
Durable Motors and Gear Motors for Industrial Applications
18:46 30/11/2018
Motors and gear motors that are used in industrial applications must be built to fit. No two applications are the same. However, they must be durable enough to withstand a variety of different environments and operating conditions.
Types of DC Motor
18:48 26/11/2018
A Direct Current Motor, DC is named according to the connection of the field winding with the armature. Mainly there are two types of DC Motors. First, one is Separately Excited DC Motor and Self-excited DC Motor.
Difference Between AC and DC Motor
18:24 24/11/2018
The AC Motor and the DC Motor are differentiated on the various factors like the source or the nature of the power used in the motor.
Difference between Stepper Motor and DC Motor
18:44 19/11/2018
The differences between Stepper Motor and Direct Current (DC) Motor are explained considering factors like nature of loop of operation of the motor, controlling, the presence of brushes, its motion and displacement.
Difference Between Stator & Rotor
18:39 19/11/2018
The stator and rotor both are the parts of the electrical motor. The significant difference between the rotor and the stator is that the rotor is the rotating part of the motor whereas the stator is the stationary part of the motor.
- Three Phase Electric Power Explained (14:26 12/11/2018)
- Difference Between Single Phase and Three Phase Induction Motor (18:32 10/11/2018)
- What do IP ratings really mean, and how do they differ from NEMA ratings? (15:27 09/11/2018)
- MOTOR EFFICIENCY LABELING (09:37 08/11/2018)
- How to Select the Right Gearmotor (15:48 05/11/2018)
- AC Induction Motor Speeds (14:22 02/11/2018)
- How to Choose an Electric Motor (14:14 02/11/2018)
- 20 Factors to Consider When You Buy an Electric Motor (14:04 02/11/2018)
- We Offer the Largest Inventory of AC and DC Electric Motors (10:21 02/11/2018)
- Motor Speeds Explained: When to Use a Gearbox (14:28 01/11/2018)
Join